RSI-I

The RSI-I (Receiver to Switch Interface) is a two channel switching unit, which makes an interface between an FM receiver (recommended PCM modulation) and a switched equipment (e.g. a camera). RSI-I decodes the input signal in two steps, which gives the possibility to control total of two functions by a single input channel (e.g. focus and shutter). The embedded relay switch triggers as an ON/OFF function controlled by a transmitter keybar.

Technical specification:

• Power supply 7-12V DC
• Consumption current 30mA
• Two input channels, each equipped with an electromagnetic relay
• Maximal switched voltage 200V
• Maximal switched (transient) current 0.5A (max. idle current 1A)
• Weight 90g
• Dimensions 150x50x23mm

RSI-II

The RSI-II (Receiver to Switch Interface II) is a single channel switching unit (microprocessor controlled). The unit is design as an interface between an FM receiver (recommended PCM modulation) and a switched equipment. RSI-II decodes the input signal in four steps, which gives the possibility to control up to four functions by the input channel. The output relay triggers as an ON/OFF function controlled by a transmitter keybar.

Technical Specification:

• Power supply 3-6V DC
• Consumption current 15mA
• One input channel and four output relays
• Maximal switched voltage 200V
• Maximal switched (transient) current 0.5A (max. idle current 1A)
• Low voltage detection (aprox. 3.5V)
• Weight 45g
• Dimensions 72x50x16mm

RIR-RM1 

The RIR-RM1 (Receiver to Infra Red - Remote 1) is an intelligent microprocessor controlled unit. The device works as a radio controlled Infra Red interface for Olympus cameras. RIR-RM1 decodes input signal and converts it to Infra Red remote control commands for the camera. The unit incorporates functions: Shutter, Zoom In and Zoom Out. All these functions are controlled by a transmitter keybar.

Technical Specification:

• Power supply 3-6V DC
• Consumption current 15mA
• Standard functions: Shutter, Zoom In and Zoom Out
• Low voltage detection (aprox. 3.5V)
• Weight 15g
• Dimension 72x50x16mm

RIR-RM2 

The RIR-RM2 (Receiver to Infra Red - Remote 2) contains all functions as RIR-RM1. In addition the unit is equipped with a function for active servomotor stabilization . This unique feature minimize camera movement, which leads to sharper and blurless pictures. The unit also contains an electronic switch (remotely controlled).

Technical Specification:

• Power supply 3-6V DC
• Consumption current 20mA
• Standard functions: Shutter, Zoom In and Zoom Out
• Active servomotor stabilization
• Transistor switched output
• Maximal switched voltage 25V
• Maximal switched current 1A
• Low voltage detection (aprox. 3.5V)
• Weight 20g
• Dimensions 72x50x16mm

Powerbox 

Portable power supply with DC power 5V, 12V and AC power 220V. Rugged construction and easy to carry case.

Technical parameters:

• DC power 12V, 20A
• DC power 5V, 3A
• Lab connectors 5 a 12V
• Car DC connector12V
• AC power 220V 100W
• Integrated charger 220V
• Weight 2 Kg
• Dimensions 33x15x23cm

Scanner 35MHz

Portable scanner for 35MHz frequency band. 

Technical parameters:

• Powered by internal accu battery 4.8V
• Charging connector
• Monitored channels 61-85 a 182-191
• PC Interface RS232
• Software Scanny
• Mountable telescopic antenna 
• Weight 200g
• Dimensions 7x14x15cm

RV-Channel

The RV-Channel (Remote Video - Channel) is a complete set for video transmission (up to 200m).

The set contains:

• Transmitter 2.4GHz
• Receiver 2.4GHz
• Miniature Black&White video camera
• Receiving directional antenna
• Antenna jack - manually operated 

ANT 2.4 

Lightweight 2.4GHz receiving antenna. This antenna extends the video transmission up to 400m.

Extender

The unit extends the effective servo movement up to 200% of the original range. Extender is designed for a Pan&Tilt servo-mechanism and can control movement of up to two standard servos in +/- 90 degrees (the device includes two independent channels).

Technical parameters:

• Voltage supply 3-6V DC
• Consumption current 5 mA
• Fully independent control of two servos
• Servo movement extension to +/- 90°
• LED indicates the function status
• Weight 10g
• Dimensions 27x32x14mm

Pan&Tilt Bowlegs 

The special aluminum legs equipped with a positioning Pan&Tilt unit. The construction is designed to minimize vibration. The Bowlegs are produced in two sizes (I. 35x40x20cm, II. 49x50x23cm). The total weight is 1-2kg, depending on equipment load.

The standard set includes:

• Bowlegs aluminum frame
• Transmitter 2.4GHz
• Unit RSI-II (or one of RSI-I, RIR-RM1, RIR-RM2)
• Pan&Tilt unit
• Battery packs 12V and 4.8V

PlaneEye - Photo

The radio controlled plane, equipped with a digital camera mount and with a video transmitter.

HeliEye - Photo

The radio controlled helicopter, equipped for a digital camera and video transmission into a ground station.

HeliEye - CAM

The radio controlled helicopter, equipped for a video camera and video transmission into a ground station.

HeliEye leaflet for download.